Product Description FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 ...
Overview: Transmit N*64k E1 signal via fiber, realize long distance data and voice signals transmission, used with FMO-V35 can extend data channel of ATM or DDN ...
FE1 to V.35 Converter GENERAL INFORMATION It is a FE1/V.35 channelizing interface converter, to realize the functions for conversion of electric level, ...
Framed E1 to V.35 Converter NIC-FE1S Establishes a permanent data link over a G.703 or G.704 E1channel effectively. This converter could be set to a wide range ...
Product Name : V.35 toE1 Interface Converter Overview: CL-C3100 V.35 to E1 Interface Converter gives the interface conversion between FE1 and V.35. Clink Here ...
Introduction FE1/V.35 converter is a device to facilitate access to V.35 protocol converter G.703 network and remote MODEM, it receives the sub-frame format of ...
Features: E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK Standard: G.703, line code: HDB3 Alarm system for E1 loss Support local...
Overview MEV-135F FE1/V.35 interface converter support the conversion between E1(N*64K) interface which accord with the ITU-T G.703 standard and V.35 interface. ...
Detailed Product Description Product Description FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 ...
Product Description FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 ...
Features: E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK Standard: G.703, line code: HDB3 Alarm system for E1 loss Support local/remote loop ...
DescriptionOverview As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, NWFEV10 adopts the ...
Detailed Product Description FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can ...
ACTIVE EQUIPMENT Protocol Converter E1/FE1 to V.35 E1 to V.35 protocol converter can realize bi-directional data transfer from E1 port to V.35. Thisequipment is ...
Having two rows of LEDs, upper row indicate local status, lower row indicate remote status and alarm status. Based on self copyright IC, high software content ...
Detailed Product Description Overview Transmit N*64k E1 signal via fiber, realize long distance data and voice signals transmission, used with FMO-V35 can ...
